⚡ Description :
YRO 2P Solar Power Surge Protection Device 20KA 40KA 275V AC Surge Arrester SPD (in short AC SPD,alias,surge suppressor,surge arrester) is suitable for TN-S, TN-C-S, TT, IT etc, the power supply system of AC 50/60Hz,<380V. When the SPD fails in breakdown for over heat or over-current, the failure release will help electric equipments separate from the power supply system and give the indication signal, it also could be replaced for the module when has operating voltage in Solar PV Systems.
⚡ Technical Data :
Pole No. : 1P,2P,3P,4P
Rated Voltage (Uc) : 275V AC
Discharge Current (8/20s) : 10kA-20kA, 20kA-40kA, 30kA-60kA
Voltage protective level CM/DM at In : ~3.6KV
Response Time : < 25ns
Working Temperature : -40℃ ~+80℃
Relative humidity : <95%
Indicate Deterioration : Green(normal), Red(malfunction)
Material of Outer Shell : Flame retardant material
Mounting Support: DIN rail 35mm
Dimension : 36*58*85 mm
⚡ Advantages :
· AC Protective Arrester SPD is suitably used in the TT, TN-S, TN-C, IT, TN-C-S and etc power supply system of AC 50/60Hz,<380V.
· Suitable for system power protection, such as power distribution cabinet, switch cabinet, switch cabinet,AC distribution board, etc.
· AC Protective Arrester SPD to protect from direct and indirect lightning impulse and other transient over voltage.
· Distribution box with outdoor input in the building and each floor
· The core parts are metal oxide vristor components with high discharge capacity.
· Low residual voltage and quick response
· Reliable control thanks to Thermo Dynamic Control disconnector.
· With remote signaling contact for control device.
· Fault indication via red mark in the inspection window.